Every minute a patient stays under is a minute your room design can't waste.
Exam rooms in most animal hospitals weren't built for dentistry. Compressed air, suction, imaging and lighting end up spread across separate machines, separate carts, and sometimes a separate room down the hall. We build the equipment layer that closes that gap, so the workup happens where the patient already is.
The room is rarely the bottleneck. The equipment around it is.
01
The X-ray is down the hall
A sedated patient gets wheeled to imaging and back for a single radiograph, adding recovery time and a second handoff that didn't need to exist.
02
Nobody plumbed this room for dental air
A handpiece or scaler needs compressed air the exam room was never fitted for, so practices either retrofit the room or work around a bulky standalone compressor.
03
The setup only works in one room
Equipment bolted to a wall or plumbed into a floor can't follow the case to a surgical overflow room, a second suite, or a mobile clinic day.
One room, three problems closed at the same time
These aren't three separate products stacked together — they're the three constraints practices told us mattered most, each solved by equipment that works alongside the others instead of around them.
No second trip to a radiology room
A detachable intraoral X-ray head and digital sensor mount on the same arm the practice already uses for chairside work, so a radiograph happens during the same procedure instead of a separate one.
- Intraoral imaging at the chair, not a shared machine across the hall
- Handheld 1.7kg X-ray head detaches for the angle a case actually needs
- Findings captured and shown to the owner on the same screen as the exam
The equipment brings its own air and suction
A built-in oil-free compressor and suction line mean the handpiece, scaler and syringe run at full pressure the moment the unit is plugged into a standard outlet — no wall-mounted compressor, no separate tank taking up floor space.
- Runs on a standard 220V or 110V outlet, nothing to install
- 58dB operating noise, quiet enough next to a sedated patient
- Every instrument mounted on one cart instead of five separate cords
From dental workup to surgery, without changing rooms
When a dental finding turns into a surgical case, an electric table with integrated scale and warming, and a mobile workstation for instruments and lighting, pick up exactly where the exam left off — in the same room, on the same visit.
- Electric height and tilt adjustment, no manual crank mid-procedure
- Integrated scale and patient warming, fewer separate devices around the table
- Mobile storage and lighting travel with the case between rooms
The right starting point depends on how your practice runs today
These are the three patterns we see most often. Tell us which one sounds closest and we'll narrow down a configuration from there.
"We do dental and prophy work, but imaging still means a separate trip."
Start with a self-contained cart that adds imaging and digital records without adding a room. Grow into onboard X-ray when the caseload calls for it.
Talk to sales about this setup →"Dental findings routinely turn into same-day surgical cases."
Pair the dental setup with an electric surgical table and mobile workstation, so a case can move from exam to OR without leaving the equipment behind.
Talk to sales about this setup →"We need the same setup to work in more than one room, or on the road."
Every cart runs on its own power and air supply and moves on locking casters, so one investment covers a second suite, an overflow room, or a mobile clinic day.
Talk to sales about this setup →0
Extra rooms needed for imaging
58dB
Operating noise, chairside next to sedation
1.7kg
Detachable, handheld X-ray head
4
Locking casters — one cart, any room
Tell us your caseload and room layout
We'll match it against these patterns and recommend a configuration — including exact specs and lead time for standard or OEM orders.